Winnebago Industries, Inc. | NHTSA Recall #91V148000

Vehicle safety recall details from the Department of Transportation.

Description

Detailed recall information for NHTSA ID 91V148000 by Winnebago Industries, Inc.. Includes 160 affected units, WHEELS, component: WHEELS, and more from the Department of Transportation.

Defect Summary

Road debris may enter an opening in the rear suspension trailing arm and damage the bearing seal.

Corrective Action

Drill a 1/8 inch vent/drain hole, clean the bearing seal area, apply heavy washout resistant grease between the hub assembly and the trailing arm surfaces, and install a foam rubber plug into the angled opening at inboard side of the trailing arm.

Recall Overview

NHTSA ID: 91V148000

Manufacturer: Winnebago Industries, Inc.

Report Received Date: 1991-09-17T00:00:00

Subject: Wheels

Component: Wheels

Potentially Affected Units: 160

Details

MFR Campaign Number: NR (Not Reported)

Recall Type: Vehicle

Defect Summary: Road debris may enter an opening in the rear suspension trailing arm and damage the bearing seal.

Consequence Summary: Vehicle stability may be impaired under certain roador operating conditions which may cause loss of vehicle control.

Corrective Action: Drill a 1/8 inch vent/drain hole, clean the bearing seal area, apply heavy washout resistant grease between the hub assembly and the trailing arm surfaces, and install a foam rubber plug into the angled opening at inboard side of the trailing arm.

Safety Information

Fire Risk When Parked: No

Do Not Drive: No

Completion Rate: N/A

Metadata

SID: row-pegj.g7wp_n7u4

NHTSA ID: 91V148000

Position: N/A

Created At: 1742808662

Created Meta: N/A

Updated At: 1742808662

Updated Meta: N/A

Meta: { }

Recall Link: